Post by navyseal on Mar 28, 2005 19:35:52 GMT -5
What you need:
crossbow
11-1/2 in. of cpvc
2 cpvc couplers
hot glue
tape
screw driver
Open up the crossbow. Mine was already modded before so if yours isn't you need to take the bow off and take out the yellow tube and barrel. Take the plunger tube and wrap tape around the nozzle until a cpvc coupler fits on it. Then glue it and wrap it in tape. Next cut 1 and 1/2 inches of cpvc and stick it in the coupler and glue it on. Get the other cpvc coupler and put it on the cpvc and glue it on. Then cut your barrel. I'm using 10 inches of cpvc. You may need to rotate the plunger tube to get your barrel exacty straight. You can wrap masking tape around theplunger head for a better seal.
crossbow
11-1/2 in. of cpvc
2 cpvc couplers
hot glue
tape
screw driver
Open up the crossbow. Mine was already modded before so if yours isn't you need to take the bow off and take out the yellow tube and barrel. Take the plunger tube and wrap tape around the nozzle until a cpvc coupler fits on it. Then glue it and wrap it in tape. Next cut 1 and 1/2 inches of cpvc and stick it in the coupler and glue it on. Get the other cpvc coupler and put it on the cpvc and glue it on. Then cut your barrel. I'm using 10 inches of cpvc. You may need to rotate the plunger tube to get your barrel exacty straight. You can wrap masking tape around theplunger head for a better seal.